PYLE Audio Car Video System PLD175TBT User Manual

PLD175TBT  
WWW. PYLEAUDIO.COM  
Instruction Manual  
CAR VIDEO SYSTEM  
DVD/VCD/MP4/MP3/CD/CD-R  
/CD-RW Compatible  
Anti-Shock Mechanism  
AM/FM 2 Band Radio  
Analogue TV Receiver  
Bluetooth Function  
PAL/NTSC Color System  
Flip Down Detachable Front Panel  
A/V Output & A/V Input  
Sub-woofer Function  
 
CONTENTS  
Safety Information  
1
2
Installation  
1. DIN FRONT-MOUNT (Method A)  
2
2. DIN REAR-MOUNT (Method B)  
Wiring Diagram  
3
4
Operation  
5
Location and Function of Keys  
Preparing The Remote Control  
Using The Detachable Front Panel  
General Operation  
5
6
7
7
Radio Operation  
9
CD/MP3 Operation  
9
DVD/VCD Operation  
11  
15  
15  
15  
16  
16  
16  
17  
17  
18  
19  
19  
20  
Data Disc Play Operation  
Operation of USB device  
Operation of Memory Card  
AV In Operation  
TV Operation  
Attachment  
Setup  
System Setup  
Language Setup  
Audio Setup  
Digital Setup  
Bluetooth Function Tipwizard  
Trouble Shooting  
22  
23  
Specification  
 
Safety Information  
Discs you can play  
You can playback the following discs-  
12CM on the receiver:  
DVD VIDEO/DVD AUDIO  
VIDEO CD/AUDIO CD  
MP3/WMA/JPEG/MPEG4  
CAUTION:  
Automotive DVD player is a class 1 laser  
product. However this car DVD player  
uses a visible/invisible laser beam which  
could cause hazardous radiation  
exposure if directed. Be sure to operate  
the car DVD player correctly as  
instructed.  
Use of controls or adjustments or  
performance of procedures other than  
those specified herein may result in  
hazardous radiation exposure.  
Do not open covers and do not repair  
yourself. Refer servicing to qualified  
personnel.  
Handling and Cleaning  
- Dirt, dust, scratches and warping discs  
will cause disoperation.  
- Do not place stickers or make scratches  
on discs.  
- Do not warp discs.  
- A disc should always be kept in its case  
when not in use to prevent from damage.  
- Do not place discs in the following  
places:  
WARNING:  
- To reduce the risk of fire or electric  
shock, do not expose this equipment to  
rain or moisture.  
- To reduce the risk of fire or electric  
shock, and annoying interference, use  
only the recommended accessories.  
- This device is intended for continuous  
operation.  
This product incorporates copyright  
protection technology that is protected  
by method claims of certain U.S. patents  
and other intellectual property rights  
owned by macro vision Corporation and  
other rights owners. Use of this  
copyright protection technology must be  
authorized by Macro vision Corporation,  
and is intended for home and other  
limited viewing uses only unless  
otherwise authorized by Macro vision  
Corporation. Reverse engineering or  
disassembly is prohibited.  
1. Direct sunlight.  
2. Dirty, dusty and damp areas.  
3.Near car heaters.  
4.On the seats or dashboard.  
Disc Cleaning  
Use a dry soft cloth to wipe the surface.  
If the disc is quite dirty, Use a soft cloth  
slightly moistures with isopropyl  
(rubbing) alcohol. Never use solvents  
such as benzene, thinner or conventional  
record cleaners as they may mar the  
surface of the disc.  
Note:  
A disc may become somewhat  
scratched (although not enough to make  
it unusable) depending on the way it is  
handled and conditions in the usage  
environment. Note these scratches are  
not an indication of any problem with the  
player.  
Region Management Information  
Region Management Information: This  
automotive DVD Player is designed and  
manufactured to respond to the Region  
Management Information that is  
recorded on a DVD disc. If the Region  
number described on the DVD disc does  
not correspond to the Region number of  
this car DVD Player, this car DVD Player  
cannot play this disc.  
 
1
Installation  
Label side up  
Notes:  
- Choose the mounting location where the unit  
will not interfere with the normal driving  
function of the driver.  
- Before finally installing the unit, connect the  
wiring temporarily and make sure it is all  
connected up properly and the unit and the  
system work properly.  
Do not touch  
the underside  
of the disc  
- Use only the parts included with the unit to  
ensure proper installation. The use of  
unauthorized parts can cause malfunctions.  
- Consult with your nearest dealer if  
installation requires the drilling of holes or  
other modifications of the vehicle.  
- Install the unit where it does not get in the  
driver's way and cannot injure the passenger if  
there is a sudden stop, like an emergency  
stop.  
Do not bend  
Wipe the disc from center  
toward the outside edge  
- If installation angel exceeds 30°from  
horizontal, the unit might not give its optimum  
performance  
Preparing New Discs with Rough Spots  
A new disc may have rough edges on its  
inside and outside edges. If a disc with  
rough edges is used, the proper setting  
will not be performed and the player will  
not play the disc. Therefore, remove the  
rough edges in advance by using a  
- Avoid installing the unit where it would  
be subject to high temperature, such as  
from direct sunlight, or from hot air, from  
the heater, or where it would be subject to  
dust, dirt or excessive vibration.  
Din Front/Rear-Mount  
ballpoint pen or pencil as shown on the  
below. To remove the rough edges, press  
the side of the pen or pencil against the  
inside and outside edges of the disc.  
This unit can be properly installed  
either from 'Front' (conventional DIN  
Front-mount) or 'Rear' (DIN Rear-mount  
installation, utilizing threaded screw  
holes at the sides of the unit chassis). For  
details, refer to the following illustrated  
installation methods.  
Rough spots on  
outside edge  
Take Out Screw Before Installation  
Before install the unit, please remove  
the two screws.  
Ball point pen  
or pencil  
Take out screws  
before installation  
Rough spots on  
inside edge  
1. DIN Front-Mount(Method A)  
Installing the unit  
 
2
1
1. Frame  
2. Release Frame Key  
2
Insert the release frame key into the  
groove at the right side of the frame,  
then prize out to remove the frame (You  
can also use the key to remove the  
frame from the left side.)  
3
3. Release Unit Key  
After releasing the frame, insert the  
release unit keys supplied with the  
accessory into the grooves at both sides  
of the unit as shown in figure until they  
click. Pulling the keys makes it possible  
to remove the unit from the dashboard.  
(Fig.1)  
1. Dashboard  
2. Hoder  
After inserting the holder into the  
dashboard, select the appropriate tab  
according to the thickness of the  
dashboard material and ben them  
inwards to secure the holder in place.  
2. DIN Rear-Mount(Method B)  
3
1
3. Screw  
2
1
6
2
4
5
3
7
4
(Fig.2)  
6
5
Ta b  
1. Dashboard  
2. Nut (5mm)  
3. Spring washer  
4. Screw (5X25mm)  
5. Screw  
6. Strap  
1. Factory-installed radio bracket  
2. Car radio mounting bracket  
3. Screw  
4. After aligning the car radio mounting  
bracket with the factory-installed radio  
bracket, tighten the screws (M5X4mm)  
at 2 places on each side.  
Be sure to use the strap to secure the  
back of the unit in place. The strap can  
be bent by hand to the desired angle.  
7. Plain washer  
Removing the unit  
1
5. When fixing factory-installed radio  
bracket with the screws, use a  
standard-tipped screwdriver to pry the  
tabs of the car radio mounting bracket  
to make them fit into holes in the  
factory-installed radio bracket.  
6. Movable panel frame.  
2
3
 
3
Wiring Diagram  
White to Rear Lch RCA output  
Red to Rear Rch RCA output  
Green to SUB-Woofer output  
TV Socket  
Violet Rear Right +  
Yellow to Battery B+  
Violet/Black Rear Right -  
Black to GND B-  
Grey Front Right +  
Red to ACC  
Blue to ANT  
Grey/Black Front Right -  
White Front Left +  
Green Rear Left +  
Green/Black Rear Left -  
White/Black Front Left -  
 
4
Operation  
Location and Function of Keys  
2
42  
6
7
44  
9
8
18  
3
26  
14  
17  
13  
20  
24  
22 16 23  
21  
25  
12  
11  
15  
19  
43  
43  
AV IN  
To connect with mobile audio  
or video system by the cable  
(included in unit)  
When you press button (3) and the front panel flip down:  
41  
4
5
10  
1
 
5
Remote control:  
-
-
Do not put in a trouser pocket.  
Keep away from food, moisture and  
dirt.  
-
DISP  
RPT  
MODE  
SUB-T  
2
Do not place in direct sunshine.  
MUTE  
7
13  
Battery replacement  
Battery type: a button cell lithium battery  
(CR2025 3V)  
1. Remove the battery holder by  
pressing the locking tab with your thumb  
and pulling it out.  
A-B  
AUDIO  
27  
39  
38  
22  
ZOOM  
28  
42  
40  
ANGLE  
MENU  
ENTER  
29  
30  
6
VOL  
SETUP  
31  
BT MENU  
36  
18  
35  
34  
TRK/TUN  
19  
TITLE  
PBC  
1
GOTO  
AS/PS  
PROG  
LO/DX  
RDM  
37  
20  
17  
21  
DEL  
B
2
5
8
3
33  
15  
14  
A
32  
2. Replacing the battery  
Replace the battery with the same type  
and the (+) side facing up.  
4
7
6
9
MO/ST  
0
BAND  
Preparing The Remote Control  
When using the Remote Control  
* Before you using the remote control,  
please take the transparent insulator  
slice off the bottom of remote control.  
* Point the remote control at the remote  
sensor (9) within 2 meters.  
* It may not be possible to operate the  
remote control if the remote control  
sensor is exposed to direct sunlight.  
* Operation angle: about 30°in each the  
direction of the front of the remote  
sensor.  
3. Closing the cover  
Gently push in the holder until securely  
locked into place.  
* The remote control is a small,  
lightweight precision device. To avoid  
damage, short battery life, operational  
errors and poor response, observe the  
following.  
- Do not subject the remote control to  
excessive shock.  
 
6
Using The Detachable Front Panel  
General Operation  
REMOVING AND PROTECTING  
DETACHABLE FRONT PANEL.  
Initial System Start-Up  
Be sure to press the RESET button (1)  
when using the unit for the first time, after  
all connections are completed correctly.  
1. Turn off the unit power.  
2. Press RESET with a ballpoint pen or  
similar pointed object.  
The front panel of the unit may be removed  
as a theft deterrent. After removing the front  
panel, use the case provided to keep the front  
panel from getting damaged.  
1.Press the Open button (3) to flip  
down the front panel.  
Turning Power On And Off  
Turn on the unit by pressing any button  
(except button (3) and button (5)) or  
inserting a disc to disc slot (4).  
When system is on, press  
turn off the unit.  
button (2) to  
open button  
Loading/Removing a Disc  
1. Press button (3) to flip down the  
front panel.  
2.Grasp the right side of the front panel,  
then gently push the front panel towards  
the left side before pulling it out from the  
unit.  
2. Insert the disc into the disc slot (4) with  
the printed side facing up; the player will  
play the disc automatically.  
front panel  
Whenever press  
disc.  
button (5) to eject the  
Adjusting sound quality  
3.Store the front panel in the protective  
case provided for safe keeping.  
PROTECTIVE CASE  
- Adjusting the volume level  
Rotate the VOL button (6) or press VOL  
(+/-) button (6) to adjust the volume level.  
- Adjusting Bass /Treble /Balance  
/Fader/EQ/Loud/Subwoofer  
1. Press VOL button (6) repeatedly to  
choose the desired mode.  
Remote control operation:  
Press Menu button (36) and then press  
button (29) to choose the desired  
mode.  
Each pressing the button changes the  
modes as follows:  
FRONT PANEL  
TO ATTACH THE FRONT PANEL  
Hold the right side of the front panel with  
the plate facing down.  
First attach the left side of the front panel  
to the unit by inserting the hole into the left  
holder.  
Then slightly push it leftwards and attach  
the right side hole into the right holder.  
Finally push up the front panel.  
VOL  
SUBW  
BASS  
TREB  
EQ  
BAL  
FAD  
LOUD  
Volume level:00 ~ 63  
Bass level: -07 ~ +07  
Treble level: -07 ~ +07  
Balance: 15L ~ 15R  
Fader: 15R ~ 15F  
2
EQ: Flat, Classic, Pop, Rock  
Loudness: ON/OFF  
1
 
7
Sub-woofer: ON/OFF  
equalization function and to select  
desired audio mode. There are four kinds  
of mode as below:  
2. Rotate the VOL button to choose the  
desired item.  
Remote control operation  
Press  
desired item.  
button (29) to choose the  
EQ FLAT  
EQ CLAS  
EQ POP  
EQ ROCK  
Display/Adjust Time  
1. Displaying time:  
Press DISP button (7) to show current  
information and time on the LCD, and it  
returns to original status after 5 seconds.  
2. Adjusting time:  
Mute Function  
Press MUTE button (2) to silence the  
sound instantly, press it again to resume  
previous volume level.  
1). Press and hold DISP button (7) until  
the clock blinking.  
Mode Function  
Press MODE button (13) to switch to the  
desired mode.  
The mode will change every time the  
button is pressed.  
2). Press  
between hour area and minute area.  
or  
button to move to  
3). Rotate VOL button (6) or  
adjust hour or minute.  
to  
DISC/USB/SD  
TV AV IN  
TUNER  
LCD Display (8)  
Exhibit current information and activated  
functions on the LCD display (8).  
Last Position Memory  
- During disc playback, if you press  
button (2) to turn off the unit and then  
press the button again to turn on the unit,  
the DVD unit will resume playing from the  
point that it was interrupted.  
- During disc playback, if you press  
MODE button (13) to switch to other  
mode, and then return to DVD/VCD mode  
again, the unit will resume playing from  
the point that it was interrupted.  
Remote Sensor  
Point the remote control handset to the  
remote sensor IR (9). Press the function  
keys on the handset to control the  
system.  
Flashing Led (10)  
The led display will flash if the front cover  
is not inserted into the main unit.  
Sub-Woofer Function  
This unit is equipped with a sub-woofer  
output jack. When a sub-woofer is  
connects to this unit. Press VOL button  
(6) repeatedly to select SUBW and then  
rotate VOL button to turn sub-woofer  
output on or off.  
ESP function  
If the unit has the electronic shockproof  
function, it can be shockproof about  
several seconds:  
CD, VCD: 18 seconds.  
MP3: 160 seconds.  
DVD: 6 seconds.  
MPEG4: 20 seconds.  
Loudness on/off  
Loudness introduces a special low- and  
high-frequency emphasis at low listening  
levels. This compensates for the ear's  
decreased sensitivity to bass and treble  
sound. Press LOUD button (11) to switch  
loudness on/off.  
Reset Function  
RESET button on the housing must be  
activated with either a ballpoint pen or  
thin metal object. The RESET button (1)  
is to be activated for the following  
reasons:  
-
Initial installation of the unit when all  
wiring is completed.  
All the function buttons do not  
operate.  
-
Equalization  
Press EQ button (12) to turn on  
 
8
- Error symbol on the display.  
Note:  
If press RESET button(1), the unit can't  
work yet, please use a cotton swab  
soaked in isopropyl alcohol to clean the  
disc socket.  
stop level, the radio is holding at that  
preset number for several seconds with  
release mute, and then searches again.  
Station Storing  
- Press  
seek mode.  
button to activate automatic  
- In manual mode, press  
select a station.  
Press preset 1-6 button (16) for several  
seconds to store current station into the  
number button.  
button to  
Radio Operation  
Selecting The Frequency Band  
Press BAND button (14) shortly to select  
the desired band. The reception band will  
change between FM and AM.  
CD/MP3 Operation  
Stereo/Mono  
Press ST (15) or MO/ST on the remote  
control to select mono/stereo mode.  
Playback  
1. Gently insert a disc with the label side  
facing up; the disc will be pulled into the  
unit automatically. The disc playback  
begins.  
Local/Distant  
Press ST LOC (15) for several seconds  
or LO/DX on the remote control to select  
between local and distant stations.  
LOCAL setting for reception of strong  
signal station, and DISTANT setting for  
reception of weaker signal stations.  
2. For CD:  
Selecting Station  
- Press preset 1-6 button (16) to select a  
station which had been stored in the  
memory.  
- Press  
MANUALappears on the display, and  
then press button to select a station.  
for several seconds until  
3. For MP3  
If both buttons have not been pressed for  
several seconds, they will return to  
automatic seek mode .  
Automatic Memory Storing & Program  
Scanning  
- Automatic memory storing  
Press AS/PS button (17) for several  
seconds, the radio searches from the  
current frequency and checks the signal  
strength until one cycle search is  
finished. And then 6 strongest stations  
are stored into the corresponding preset  
number button.  
1). Press  
work area A, B and C.  
button to move between  
- Program scanning  
2). Press  
button to select the  
Press AS/PS button (17) shortly to scan  
preset station. When the field strength  
level is more than the threshold level of  
desired folder or file of this work area.  
3). Press ENTER button (30) to confirm  
the selected item.  
 
9
Selecting Tracks In Single Step  
Press  
REP 1 REP ALL REP OFF  
For MP3:  
button (18) or button (19) to  
skip to the previous track or the next  
track. Track number shows on display.  
REP 1 REP DIR REP ALL REP OFF  
Press and Hold  
button (18) or  
NOTES:  
REP 1: Only the current track (file) is  
repeatedly playing.  
button (19) to fast reverse or fast  
forward. It return to normal mode when  
you release the button.  
REP DIR: Only tracks (files) in the  
current folder are repeatedly playing.  
REP ALL: Current disc is repeatedly  
playing.  
REP OFF: The mode returns to normal  
playback.  
- Paragraph Repeat Play:  
Pause Playback  
Press  
button (20) to pause CD/MP3  
playing. Press it again to resume  
playback.  
Stopping playback  
When you want to repeat play a desired  
paragraph. A-B repeat allows a passage  
to be repeated continuously.  
Press A-B button (27) first at the start of  
the required passage.  
- Briefly press the button (21) to stop  
the unit playback. When the button (21)  
is pressed and then press button(20),  
resume to the normal playback.  
- Press button (21) twice and then  
press button (20) to stop the playback  
and go back to beginning of the disc.  
REPEAT A-  
Press A-B button (27) secondly at the  
end of the passage.  
Fast-Forward / Fast-Reverse  
1. Fast-Forward  
REPEAT A-B  
Press button (35) during playback.  
Each time the button is pressed, the  
speed of fast-forward changes according  
to the disc as follows:  
Then the unit will repeat playing the  
passage you just set from A to B.  
To revert to normal playback, press A-B  
button again.  
FORWARD 2X 4X 8X 20X  
REPEAT CANCEL  
In fast-forward state, press button (20)  
to recover normal playback.  
2. Fast-Reverse  
Playing In Random Sequence  
Press button (34) during playback.  
Each time the button is pressed, the  
speed of fast-reverse changes according  
to the disc as follows:  
Press RDM button to toggle the random  
mode on/off. If the random mode is on,  
tracks (files) on the disc will be play in  
random sequence.  
BACKWARD 2X 4X 8X 20X  
Previewing All Tracks  
In fast-reverse state, press button (20)  
to recover normal playback.  
Press INT button (24) to play first several  
seconds of each track on the current  
disc. Press the button again to stop intro  
and return to normal mode.  
Repeat Play/ Paragraph Repeat Play  
- Repeat play:  
When you want to repeat play whole disc,  
a track or a directory in the disc.  
1) Press RPT button (22) repeatedly to  
select different repeat modes.  
2) For different kinds of discs, pressing  
RPT button (22)has different effects.  
For CD:  
 
10  
In fast-forward state, press button (20)  
to recover normal playback.  
2. Fast-Reverse  
DVD/VCD Operation  
Playback with PBC Menu  
For some VCD or SVCD discs, there is  
menu in order to select the deired  
contents. This menu is called PBC  
(Playback Control) menu.  
Press PBC button (37) to toggle between  
PBC ON and PBC OFF.  
Press button (34) during playback.  
Each time the button is pressed, the  
speed of fast-reverse changes according  
to the disc as follows:  
BACKWARD 2X  
4X  
8X  
20X  
In fast-reverse state, press button (20)  
to recover normal playback.  
In PBC ON mode, REPEAT, RANDOM, A-  
B, PROGRAM and GOTO functions are  
void.  
Repeat Play/ Paragraph Repeat Play  
- Repeat play:  
Playback With Menu  
If the DVD disc or VCD/SVCD discs has a  
menu system, and the PBC (Playback  
Control) setting is on, you can display the  
menu which allow you to select the  
program to playback by pressing  
TITLE/PBC button (37).  
When you want to repeat play whole disc,  
a track or a chapter in the disc.  
1) Press RPT button (22) repeatedly to  
select different repeat modes.  
2) For different kinds of discs, pressing  
RPT button (22) has different effects.  
For DVD:  
1. Move the cursor buttons (  
highlight the item you wish to select.  
) to  
REP CHAPTER REP TITLE REP OFF  
2. Press ENTER button (30) to select this  
item.  
For VCD/SVCD:  
Some discs offer a series of menus which  
with a wide variety of choices. You can  
continue to navigate the menu further  
using a combination of the cursor buttons  
REP 1 REP ALL REP OFF  
NOTES:  
REP 1: Only current track (file) is  
repeatedly play.  
(
) and the ENTER button (30).  
REP CHAPTER: The current chapter is  
repeatedly play.  
Pausing playback  
1. During playback, Press  
button (20),  
REP TITLE: The title is repeatedly play.  
REP ALL: A disc is repeatedly play.  
REP OFF: The mode returns to normal  
playback.  
the image or sound pauses temporarily.  
2. Press the button (20) again to  
resume playback.  
* Repeat feature does not support VCD  
2.0 (PBC is on).  
Stopping Playback  
Briefly press the  
button (21) to stop  
the unit playback When the  
pressed and then press  
resume to the normal playback.  
Press button (21) twice and then  
press button 20 to stop playback  
button is  
button 20 ,  
- Paragraph Repeat Play:  
When you want to repeat play a desired  
paragraph. A-B repeat allows a passage  
to be repeated continuously.  
Press A-B button (27) first at the start of  
the required passage.  
and go back to the initial track/chapter.  
Fast-Forward / Fast-Reverse  
1. Fast-Forward  
Press the button (35) during playback.  
Each time the button is pressed, the  
speed of fast-forward changes according  
to the disc as follows:  
REPEAT A-  
Press A-B button secondly at the end of  
the passage.  
REPEAT A-B  
Then the unit will repeat playing the  
passage you just set from A to B.  
FORWARD 2X 4X 8X 20X  
 
11  
To revert to normal playback, press A-B  
button again.  
console information of the current disc on  
the screen.  
FOR DVD:  
Press SUB-T button (38) for several  
seconds continually, you will see the  
information as the following order.  
REPEAT CANCEL  
Finding The Beginning of Chapters or  
tracks (Files)  
Use this function to easily move to the  
beginning of the chapters or tracks (files)  
on the disc.  
During playback, each time press  
button (18) or button (19) to skip and  
play the chapter /track.  
: Press the button to start playback  
from the beginning of the next chapter or  
track (file).  
1)TT  
Display the current title number and total  
title number.  
2)CH  
Display the current chapter number and  
total chapter number.  
3)  
Display the played times of the whole  
disc.  
4)C-:  
: Press the button to start playback  
from the beginning of the previous  
chapter or track (file).  
Note:  
1. Some DVDs do not have chapters.  
2. For some VCD2.0 discs (PBC control),  
,
buttons may be void.  
Display the remaining times of the  
current chapter.  
5)T:  
Display the played times of the current  
title.  
6)T-:  
Searching Directly by Chapter or Track  
Number  
Use this function to easily move to the  
beginning of the chapters or tracks (files)  
on the disc.  
* This operation is performed by the  
remote control unit.  
Display the remaining times of the  
current title.  
1. During playback, pre-stop or pause,  
input the chapter or track number you  
want using the numeric keypad (0to  
9).  
7)C:  
Display the played times of the current  
chapter.  
8)  
2. Waiting for a little.  
Playback starts from the selected  
chapter or track.  
* This function cannot be used on discs  
which no chapter numbers are recorded.  
Display the current disc language, audio  
type, subtitle language and play angle.  
For VCD:  
The meaning of the menu is the same  
with the DVD menu above.  
Playing In Random Sequence  
Press RDM button to switch the random  
mode on/off.If the random mode is on,  
tracks (files) on the disc will be play in  
random sequence.  
On Screen Display Function  
Press the SUB-T button (38) for several  
seconds during playback to display the  
 
12  
according to the disc.  
- Some discs only contain one subtitle  
language.  
GOTO Function  
Press GOTO button, the screen will  
display the following message:  
FOR DVD:  
Switching the Audio Tracks  
For some VCD/SVCD discs what with  
multiple audio tracks, you can switch the  
audio track temporarily during playback.  
Each time press AUDIO button (39)  
during playback, the sound switches  
between the audio tracks recorded on the  
disc.  
Use the number keys (32) to input the  
desired Title, Chapter or Time, and then  
press ENTER button (30) to confirm.  
FOR VCD:  
PBC  
Use the number keys (32) to input the  
Track and Time then press ENTER button  
(30) to confirm.  
Notes:  
- Some discs only contain one  
soundtrack language.  
ZOOM Function  
Press ZOOM button (28) to enlarge or  
reduce the size of image according to the  
disc as follows.  
Multi-audio Language Function  
For DVD discs what with multiple audio  
tracks, you can switch the audio track  
temporarily during playback.  
ZOOM 2 ZOOM 3 ZOOM 4 ZOOM 1/2  
ZOOM 1/3 ZOOM 1/4 ZOOM OFF  
In zoom in state, press  
buttons  
Each time press AUDIO button (39)  
during playback, the sound switches  
between the audio tracks recorded on the  
disc.  
(29) to move pictures up/down, left/right  
direction in order to find the picture that  
you want to zoom in.  
:
Multi-subtitle Language Function  
Some DVD has multiple subtitle  
language, the subtitle language can be  
switched during playback, or subtitles  
can be hidden.  
Press SUB-T button (38) during  
playback. The following information will  
be shown on the screen.  
:
Each time the button is pressed, the  
audio soundtrack language changes on  
sequential order.  
Notes:  
- The language number is different  
according to the disc.  
- Some discs only contain one  
soundtrack language.  
- Not all discs will allow changing the  
subtitle during playback. In these cases,  
select subtitle from the DVD's menu.  
Each time press the button, the subtitle  
switches between multiple languages  
recorded on the disc.  
Notes:  
- Not all discs will allow changing the  
subtitle during playback. In these cases,  
select subtitle from the DVD's menu.  
- There may be a delay before the  
selected subtitle appears.  
Multi-angle Function  
For some DVD discs in which scenes  
have been filmed from multiple angles,  
the angle can be switched during  
playback.  
- For some discs, the subtitles will be  
displayed even when this is set to off.  
- The language number is different  
Press ANGLE button (40) during  
playback. The following information will  
be shown on the screen.  
 
13  
ANGLE 1  
edit interface as follow:  
The angle switches between the angles  
recorded on the disc each time the button  
is pressed.  
Notes:  
- Some time may be required for the  
angle to change.  
- Depending on the disc, the angle may  
switch in one of two ways.  
1. Seamless: The angle switches  
smoothly.  
2. Non-seamless: When the angle is  
switched, a still picture is displayed  
first, after which the angle switches.  
- The angle number is different  
according to the disc.  
Use  
cursor button to select the  
item that you want to program.  
1). The item you selected will become  
highlight.  
- The function only works for discs  
having scenes recorded at different  
angles.  
2). Input the track number that you want  
to program by numeric buttons (0-9) on  
the remote control.  
3). Press  
cursor buttons to  
Program Play Function  
move to "PLAY" operation button and  
then press ENTER button (30) to program  
playback.  
- In VCD/CD playback mode, press  
PROG button 33) can activate program  
edit interface as follow:  
Frequently Asked Questions  
When inserting a DVD disc, why it can't  
be played, just showing region error?  
It is because that the DVD player and  
the discs all have the REGION CODE. If  
the region number described on the DVD  
disc does not correspond to the region  
number of this DVD player, the unit  
cannot play the disc.  
When inserting a DVD disc, there is a  
window shown on the screen that  
requires entering 4 characters password,  
why?  
Use  
cursor button to select the  
It is because that the current disc has  
Parental Controllevel, and the player's  
parental level is set below the level of the  
disc, you should enter the correct  
password to play the disc normally.  
NOTE:  
For how to set the Parental Control”  
level, please refer to Parental Control”  
on page 17.  
item that you want to program.  
1). The item you selected will become  
highlight.  
2). Input the track number that you want  
to program by numeric buttons (0-9) on  
the remote control.  
3). Press  
cursor buttons to  
move to "PLAY" operation button and  
then press ENTER button (30) to  
program playback.  
- In DVD/MP3 playback mode, press  
PROG button (33) to activate program  
 
14  
disc. Press  
(21) button to enter into  
Data Disc Play Operation  
PRE-STOP mode, then press GOTO  
button to switch to the reading USB  
mode.  
When you insert a data disc including  
audio (MP3), movie (MPEG), picture  
(JPG) files into the disc slot, the following  
media play window will be shown on the  
screen:  
Note:  
When reading the USB device, please  
don't touch or take out the device.  
If following the instruction above, the unit  
can't still read the device, please check if  
the device is in good condition, or take  
out the device then insert it into the USB  
port (26) once more.  
? The main unit can only support the  
standard USB-memory disc which is  
approved by Microsoft.  
? USB MP3 player is not a standard  
which means different brand name or  
different models have their own standard.  
So our product may not support every  
MP3 player.  
?When connecting an MP3 player and  
there has normal battery in the player  
(non rechargeable battery), you should  
remove the battery from the MP3 player  
then connect it to the USB port.  
Otherwise, it may cause battery burst.  
?When in USB play mode, be sure not to  
remove the USB device from the USB  
port.  
Explain as follows:  
Work area A: folders list  
Work area B: files list  
Work area C:  
(1): playback audio mode (default)  
(2): viewing picture mode  
(3): playback movie mode  
Work area D: file information display  
1. Press  
button to move between  
work area A, work area B and work area  
C.  
Operation of Memory Card  
2. Press  
folder or file of this work area.  
3. Press ENTER button (30) to confirm  
the selected item.  
button to select the desired  
This disc player offers you a memory card  
slot (41).  
4. In viewing picture or playback movie  
mode, if you want to return to the  
Using the SD/MMC card:  
When you insert a SD/MMC card into the  
memory card slot (41), the DVD player  
will read the SD/MMC card automatically.  
The unit gives first priority to the latter. If  
insert a disc into the disc slot (4) while  
read the SD/MMC card, the unit will play  
the disc. Press (21) button to enter into  
PRE-STOP mode, then press GOTO  
button to switch to the reading card  
mode.  
previous menu, press  
(STOP) button.  
Operation of USB device  
This disc player offers you an USB port  
(26). A USB device can be connected  
through this slot.  
Using the USB driver:  
When you insert an USB device into the  
USB port (26), the DVD player will read  
the USB automatically.  
The unit gives priority to the latter. If  
insert a disc into the disc slot (4) while  
read the USB device, the unit will play the  
Note:  
When reading the memory card, please  
don't touch or take out the card.  
If following the instruction above, the unit  
can't still read the card, please check if  
 
15  
the card is in good condition, or take out  
the card then insert it into the card slot  
once more.  
Attachment  
1. About Parental Control  
DVD discs have a parental level assigned to  
the disc. The range of parental controls is  
from 1 to 8.  
AV In Operation  
The player can be set in a similar way. If the  
player's parental level is set to 8 it will play  
all discs. If the player's parental level is set  
below 8, only discs with a lower or equal  
parental level can be played.  
For example if the player is set to 5, only  
discs with parental control ratings of 5, 4, 3,  
2, & 1 can be played. To play a higher rated  
disc you must change the player's rating to  
a higher number.  
This disc player offers you the option of  
using the auxiliary A/V input jack to  
connect a video game, digital camera/  
camcorder or other units you wish to use  
in your automobile audio/video system.  
1).To connect with a automobile  
audio/video system by AV IN cable.  
2).Press the MODE button (13) to toggle  
the AV IN mode on or off.  
For example, consider a disc that generally  
is suitable for most audiences, and is rated  
as level 2 for the most part. However in the  
middle there are also scenes rated at 5 & 7  
that are not fitting for children, it will be  
cleared or replaced by the other fitting  
scene automatically.  
TV Operation  
Press MODE button (13) to switch to TV  
mode. In TV mode, the function of the  
buttons served in DVD mode is locked.  
The player plays the highest rated scene  
that the parental setting allows.  
Searching Channels  
Pressing GOTO button will enter into  
automatically searching state. Then  
press button (19) to start searching TV  
channels and press button (18) to stop  
searching.  
A section of the disc can have several  
different sequences that vary in parental  
control level. In the above example of a disc  
with parental control, the player will show a  
different section depending on the parental  
control level set in the player's menu.  
In this way parents can control the content  
of films and there is no indication that any  
censorship has occurred.  
Selecting Channels  
- Press button (19) to choose channel  
upward, press button (18) to choose  
The meaning of the levels 1 to 8 varies  
depending upon the country and the type of  
content on the disc.  
channel downward.  
- Type two digits to select desired  
channel by the corresponding numeric  
button (32).  
The parental control levers are:  
Unlock  
KID SAFE  
G
PG  
PG 13  
Unlock  
PG-R  
R
NC-17  
ADULT  
Volume Adjustment  
Press VOL+/VOL- button (6) adjust  
volume level.  
1
2
3
4
5
6
7
8
Mute  
Press MUTE button (2) to mute the  
sound, press this button again to resume  
previous volume level.  
 
16  
2. About MP3  
What is MP3?  
Setup  
MP3, whose official name is MPEG-1 Audio  
Layer 3,is a compression standard  
prescribed by the ISO, the International  
standardization organization and MPEG  
which is a joint activity institution of the IEC.  
MP3 files contain compressed audio data.  
MP3 encoding is capable of compressing  
audio data at extremely high ratios,  
reducing the size of music files to as much  
as one-tenth their original size. This is  
achieved while still maintaining near CD  
quality. The MP3 format realizes such high  
compression ratios by eliminating the  
sounds that are either inaudible to the  
human ear or masked by other sounds.  
Method for creating MP3 files  
Audio data is compressed by using MP3  
specified software. For details on creating  
MP3 files, refer to the user's manual for that  
software.  
MP3 files that can be played back by this  
device have the file extension MP3. Files  
with no extension cannot be played back.  
Supported playback sampling rates and bit  
rates  
In DVD mode, when the disc is playing or  
in stop mode, press SETUP button (31) to  
enter setup menu.  
1. When the cursor is on the topside, use  
buttons to move between the  
different pages.  
2. Press button to move the cursor to  
the setup page below and then you can  
use buttons to move between the  
different setup options.  
3. Press or ENTER button to move to  
the choice list of each setup option and  
then use  
buttons and ENTER  
button to change your selection.  
4. When the setting is complete, press  
SETUP button (31) to return to normal  
mode.  
* When settings are changed, old settings  
are overwritten. Make a note of the  
current settings before making changes.  
If the vehicles battery is disconnected,  
the settings will be cleared and will return  
to the factory settings.  
MP3:  
Sampling rates: 32 KHz - 48 KHz  
Bit rates: 32 + 320 kbps  
Producing MP3 discs  
System Setup  
When you open the setup menu, you will  
see the system setup page at first, see  
below:  
MP3 files are prepared, and then written to  
a CD-R or CD-RW (DVD-R/DVD-RW) using  
CD-R writing software. A disc can hold up to  
1024 files /256 folders (including root  
folders).  
Corresponding file systems  
This device supports discs formatted with  
iso9660 level 1 or level 2.  
Under the iso9660 standard, there are  
some restrictions to remember.  
The maximum nested folder depth is 8  
(including the root directory). The number  
of characters for a folder/file names are  
letters A-Z (all caps), numbers 0-9, and '_'  
(underscore).  
SYSTEM SETUP  
TV SYSTEM  
SCREEN SAVER  
TV TYPE  
PASSWORD  
RATING  
DEFAULT  
EXIT SETUP  
TV SYSTEM  
TV SYSTEM is used to select the TV  
output mode. This player can play discs  
recorded in either PAL or NTSC formats.  
Select NTSC format, when the unit is  
connected to NTSC TV.  
This device also can play back discs in  
Joliet, Romeo, etc., and other standards  
that conform to iso9660. However,  
sometimes the file names, folder names,  
etc., are not displayed correctly.  
Select PAL format, when the unit is  
connected to PAL TV.  
 
17  
Select AUTO format, the player TV output  
Change the TV mode among NTSC, PAL  
and AUTO. The default setting is NTSC  
format.  
16:9  
Select this when connected to a wide  
screen TV.  
SCREEN SAVER  
Change the SCREEN SAVER on or off.  
SETTING the TV TYPE  
Use the procedure described below to set  
the output screen according to the type of  
TV monitor being used.  
Setting contents: 4:3PS /4:3LB /16:9.  
For some discs, the picture may not be  
set to the selected screen size. (For  
details, refer to the explanation on the  
disc's jacket.)  
Password  
Change the password locking or  
unlocking Inputting numbers are  
dispalyed as "XXXX" The default  
password is 0000.  
SETTING the Rating Level (Parental  
Control)  
4:3 PS (PAN SCAN)  
Select this when connected to a  
conventional 4:3size monitor. The picture  
will fill the entire TV screen. However,  
due to the mismatch in aspect ratio, parts  
of the movie at the extreme left and right  
sides will not be visible (when playing a  
16:9 size movie).  
Use this function to restrict the viewing of  
movies to children of appropriate age  
levels only.  
1) Press  
or  
button to select  
PASSWORDthen press ENTER button.  
2) The password input mode is activate.  
Use the numeric keypad 0to 9to input  
the 4-digit password, and then press  
ENTER button. The default password is  
0000upon shipment from the factory.  
3) Press or button to select  
RATINGthen press ENTER button.  
The restriction level parental level  
input display appears  
This is selected upon shipment from the  
factory.  
4:3 (LETTER BOX)  
4) Press  
button to select the  
restriction level (1 to 8), and then press  
ENTER button.  
Select this when connected to a  
conventional 4:3 size (normal TV aspect  
ratio) monitor. There may be black bands  
visible at the top and bottom of the  
screen (when playing a 16:9 size movie).  
The width of these stripes will depend  
upon the original aspect ratio of the  
theatre release of the movie.  
5) When the setting is complete, press  
SETUP button to return to normal mode.  
DEFAULT  
Restore the system setup to the default  
setup.  
Language Setup  
When you open the language setup  
menu, you will see the language setup  
page:  
 
18  
menu, you will see the DIGITAL SETUP  
page:  
LANGUAGE SETUP  
OSD LANGUAGE  
AUDIO LANG  
DIGITAL SETUP  
SUBTITLE LANG  
MENU LANG  
DIVX [R] VOD  
OP MODE  
DYNAMIC RANGE  
DUAL MONO  
EXIT SETUP  
EXIT SETUP  
You can change the OSD/ AUDIO/  
SUBTITLE/ MENU language:  
1). OP MODE: Change among LINE  
OUT/RF REMOD.  
OSD LANGUAGE:  
ENGLISH/GERMAN/SPANISH/FRENCH/PORTU  
GUESE/ITALIAN/RUSSIAN/POLISH  
- LINE OUT: LINE OUT mode, with  
digital dialog normalization.  
- RF REMOD: RF REMODULATION  
mode, with heavy compression and  
digital dialog normalization.  
2). DYNAMIC RANGE: Change among  
FULL, 6/8, 4/8, 2/8, OFF.  
AUDIO LANG:  
ENGLISH/GERMAN/SPANISH/FRENCH/PORTU  
GUESE/ITALIAN/RUSSIAN/POLISH  
3). DUAL MONO: Change among  
STEREO, MONO L, MONO R, MIX  
MONO.  
SUBTITLE LANG:  
ENGLISH/GERMAN/SPANISH/FRENCH/PORTU  
GUESE/ITALIAN/RUSSIAN/POLISH  
MENU LANG:  
ENGLISH/GERMAN/SPANISH/FRENCH/PORTU  
GUESE/ITALIAN/RUSSIAN/POLISH  
Audio Setup  
When you open the AUDIO menu, you will  
see the following picture:  
AUDIO SETUP  
AUDIO OUT  
KEY  
EXIT SETUP  
1) AUDIO OUT: Change among  
SPDIF/OFF, SPDIF/RAW and  
SPDIF/PCM.  
2) KEY: Change among b,-4, -2, 0, +2,  
+4, #.  
Digital Setup  
When you open the DIGITAL SETUP  
 
19  
6. BT MENU  
Bluetooth function Tipwizard  
At connect status, press the BT MENU  
button (31) on the remote control to enter  
bluetooth menu. The structure of the blue  
tooth menu as follows:  
1. PAIR  
During pairing, please input pairing PIN  
code “8888” and confirm in your mobile  
phone.  
PRES  
RECV  
DIAL  
MISS  
06: Preset number list.  
06: Received call list.  
06: Dialed call list.  
06: Missd call list.  
2. CONNECT  
The bluetooth module can auto connect  
with your mobile phone so long as you  
activate the bluetooth of the mobile  
phone. If connecting success, CON OK”  
will be visible on the LCD of this unit,  
otherwise, it will appear NO CONT” on  
AUTO ON/OFF: Switch auto answer or  
manual answer.  
Use  
cursor button to select the item.  
Press the ENTER to enter the current  
menu item. Press the ZOOM button (28)  
to exit from current menu. Press the BT  
MENU button exit bluetooth menu.  
the LCD. Meanwhile, the “BT” and “  
twinkle continuously on the LCD display.  
3. DIAL CALL  
a) Select preset number list:  
You can select the next or prev phone  
number that stored on preset number list  
3.1 Dial with the mobile phone directly.  
3.2 Dial with the remote controller.  
3.2.1 At connect status, press the “  
button (42) to activate bluetooth mode,  
the “CONNTED” will be shown on the  
LCD display.  
3.2.2 Press “0~9” button on the remote  
control to input telephone number.  
Simultaneity, the input number will be  
appeared on the LCD. If a number is  
wrongly input, press the DEL button (21)  
to delete the incorrect number.  
by pressing the  
button.  
b) Edit preset number list:  
Press ENTER to enter preset number list.  
You can see NONUMBER(1-6) on the  
LCD if you haven’t stored any phone  
number. Then press ENTER again to  
enter editing status. Press 0~9, # or to  
*
edit phone number, (pressing and holding  
the + (14) button, when you want to input  
“ + ”) . Simultaneity, the inputted number  
will be appeared on the LCD. If a number  
is wrongly input, press the DEL button  
(21) to delete the incorrect number. After  
the entire phone number has been input,  
press the ZOOM to save the phone  
number. Press ZOOM again to exit from  
phone editing status.  
3.2.3 press the “  
dialing.  
” button to execute  
4. Accept / Reject / End call  
4.1 Accept call  
When a ring comes, press the “ ” button  
to switch on the calling.  
4.2 Reject call  
When a ring comes, press the “ ” button  
(40) to reject the coming call.  
4.3 End call  
c) Dial phone number of menu list:  
When you look around the preset number  
or received list or dialed list or missed  
list, you can dial any phone number on  
When you are talking, press the “  
button to hang up the current call.  
the lists by pressing “  
button.  
5. Call Transfer  
During talking status, you can transfer  
talking to private listening on your phone  
d) Switch auto or manual answer  
Select auto answer or manual answer the  
from your car audio by pressing the “  
button; press the “ ” button again to get  
back to car audio.  
coming phone by pressing  
enter this preset item.  
after  
 
20  
7. Voice dialing function  
If your mobile phone support voice  
dialing function, you can dial a phone  
number by voice dialing.  
Remark:  
Please operate the voice dial function  
according to your mobile phone manual.  
8. A2DP Function  
If your mobile phone support A2DP  
function ( Advance Audio Distribution  
Profile) that it is special designed for  
transmitting stereo music to bluetooth  
device. You can listen to the music stored  
in your mobile phone by this car audio.  
The  
,
and button are available  
in A2DP playback status.  
Press the MODE button to switch to other  
mode.  
Remark:  
Please be sure that the distance between  
Your mobile phone and car audio is less  
3 meters.  
 
21  
?
Aim the remote control directly at  
Trouble Shooting  
the sensor on the front of the player.  
? Avoid all obstacles which may interfere  
with the signal path.  
? Inspect or replace the remote control  
battery.  
Distorted or B/W Picture  
If it appears that your DVD unit is faulty,  
first consult this checklist. It may be that  
something simple has been overlooked.  
Do not try to repair the player by yourself,  
as this will invalidate the warranty. Only  
qualified service personnel can remove  
the cover or service this player.  
?
The disc format is not according to  
the TV-set used (PAL/NTSC).  
No Audio at Digital Output  
?
? Check the Digital Audio menu to make  
sure that the digital output is correctly  
set.  
? Check if the audio format of the  
selected audio language matches your  
receiver's capabilities.  
No Power  
?
Check the digital connections  
If the power supply is connected to  
the car accessory circuits, but the engine  
is not moving, switch the ignition key to  
ACC.  
? Check if the fuse is blown. Then  
replace the new fuse.  
? Check if the on/off button on the front of  
the player is set to on.  
No Picture  
? Check if the monitor or TV is  
switched on.  
? Check if select proper mode, such as  
Disc Play mode and AV mode.  
? Check the video connection.  
Distorted Picture  
Buttons Do Not Work  
? Press Reset button on the housing  
of the DVD unit.  
The Radio Does Not Work  
? Check if the antenna cable is  
connected firmly.  
The Radio Station Automatic Selection  
Does Not Work  
? If the signals are too weak, select a  
station manually.  
?
Check the disc for fingerprints and  
clean with soft cloth, wiping from centre  
to edge.  
? Sometimes a small amount of picture  
distortion may appear. This is not a  
malfunction.  
Completely Distorted Picture  
?
The disc format is not matching up to  
the TV-set used (PAL/NTSC).  
No Color in Picture  
?
The disc format is not matching up to  
the TV-set used (PAL/NTSC).  
Disc Does Not Play  
? Ensure the disc label is upwards.  
? Clean the disc.  
? Check if the disc is defective by trying  
another disc.  
No Sound  
?
Check audio connections.  
? If using a HIFI amplifier, try another  
sound source.  
Distorted Sound from HIFI Amplifier  
?
Check to make sure that no audio  
connections are made to the amplifier  
phono input.  
The Player Does Not Respond To the  
Remote Control  
 
22  
Specification  
1. GENERAL  
Power Supply Requirements  
DC 12 Volts, Negative Ground  
Chassis Dimensions  
178(W)x160(D)x 50(H)  
Tone Controls  
- Bass (at 100 Hz) 10 dB  
- Treble (at 10 KHz) 10 dB  
Maximum Output Power  
4x60 watts  
Current Drain  
15 Ampere (max.)  
2. DVD PLAYER  
Signal to Noise Ratio  
> 55 dB  
Channel Separation  
> 40 dB  
Frequency Response  
20Hz - 20 KHz  
3. RADIO  
FM  
Frequency Coverage  
FM: 87.5 - 107.9 MHz  
IF  
10.7 MHz  
Sensitivity (S/N=30dB)  
4µV  
Stereo Separation  
>25dB  
AM  
Frequency Coverage  
530 - 1710 KHz  
IF  
450 KHz  
 
23  
 
24  

Pelco Home Theater Screen C2943M B User Manual
Philips Car Video System 170B6 User Manual
Philips Electric Shaver QG3040 10 User Manual
Philips Portable Radio AE6565 User Manual
Philips Projection Television 9P 6034C User Manual
Philips Universal Remote RU 600 User Manual
Philips VCR VR255 50 User Manual
Pioneer Computer Drive DE UH9101 User Manual
Polaroid TV DVD Combo 1513 TDXB User Manual
Precor Treadmill c954 User Manual